MAC TARGET DISK MODE USB C MAC
If the target Mac only displays the FireWire icon as shown above, then you will need to use the FireWire port to access the Mac internal drive from the host computer. Newer Apple Macintosh computers with Thunderbolt ports (faster than FireWire) will also display the Thunderbolt icon when going into target mode. Since there is no write protection inherent to Target Mode if you connect a Mac to a Mac using Target mode without first turning off disk arbitration your host Mac will mount the file system, which can result in the undesired alteration of data. When the copy is completed, you may turn off the target Mac computer and disconnect the FireWire cable. Mac disk arbitration will automatically mount any disk connected to it.Use a defensible copy utility or hard drive imaging application to collect the relevant contents.The hard drive of the target computer should become available on the host computer, and you will then be able to access the files from the Mac hard drive. In earlier generations of Apple MacBook computers, TDM or Target Disk Mode was a boot mode that made all internal drives appear to an external FireWire capable system to be LUNs which could be consumed by another endpoint (This usually included the internal Hard Drive and CD/DVD-ROMs). Turn on the target Mac while holding down the âTâ key until you see the FireWire icon.Connect the FireWire cable from the Windows host to the target Mac.Make sure the target Mac computer is turned off.
Once your host Windows computer is set up and ready to access the target Mac, follow these steps:
MAC TARGET DISK MODE USB C SOFTWARE
MAC TARGET DISK MODE USB C PC
When using a Windows PC to access the target Mac hard drive, there are a few things to prepare: Make sure the cable being used fits the FireWire connector on the Mac since there are different shape connectors for FireWire standards. Many laptops have PCMCIA or ExpressCard/34 slots that allow insertion of a FireWire card. If there is not a FireWire port on the Windows host computer, you will need to purchase an adapter for the system.
Target disk mode requires the host computer (systems accessing the Mac) to connect via a FireWire port (or Thunderbolt with newer Macs) to the target Mac. Therefore, target disk mode allows forensic examiners to access the internal Mac drive as an external hard drive from another Mac or a Windows PC. Removing hard drives instead from a Mac computer can be time consuming and result in damage to the system when not performed properly. Booting an Apple Macintosh in target disk mode allows computer forensic examiners to copy relevant files from the internal drive on a Mac computer.